Remove btop conf from repo

1 files changed, 0 insertions, 206 deletions

diff --git a/.config/btop/btop.conf b/.config/btop/btop.conf
deleted file mode 100644
index 7ac047d..0000000
--- a/.config/btop/btop.conf
+++ /dev/null
@@ -1,206 +0,0 @@
-#? Config file for btop v. 1.2.8
-
-#* Name of a btop++/bpytop/bashtop formatted ".theme" file, "Default" and "TTY" for builtin themes.
-#* Themes should be placed in "../share/btop/themes" relative to binary or "$HOME/.config/btop/themes"
-color_theme = "/usr/share/btop/themes/everforest-dark-hard.theme"
-
-#* If the theme set background should be shown, set to False if you want terminal background transparency.
-theme_background = False
-
-#* Sets if 24-bit truecolor should be used, will convert 24-bit colors to 256 color (6x6x6 color cube) if false.
-truecolor = True
-
-#* Set to true to force tty mode regardless if a real tty has been detected or not.
-#* Will force 16-color mode and TTY theme, set all graph symbols to "tty" and swap out other non tty friendly symbols.
-force_tty = False
-
-#* Define presets for the layout of the boxes. Preset 0 is always all boxes shown with default settings. Max 9 presets.
-#* Format: "box_name:P:G,box_name:P:G" P=(0 or 1) for alternate positions, G=graph symbol to use for box.
-#* Use withespace " " as separator between different presets.
-#* Example: "cpu:0:default,mem:0:tty,proc:1:default cpu:0:braille,proc:0:tty"
-presets = "cpu:1:default,proc:0:default cpu:0:default,mem:0:default,net:0:default cpu:0:block,net:0:tty"
-
-#* Set to True to enable "h,j,k,l,g,G" keys for directional control in lists.
-#* Conflicting keys for h:"help" and k:"kill" is accessible while holding shift.
-vim_keys = False
-
-#* Rounded corners on boxes, is ignored if TTY mode is ON.
-rounded_corners = True
-
-#* Default symbols to use for graph creation, "braille", "block" or "tty".
-#* "braille" offers the highest resolution but might not be included in all fonts.
-#* "block" has half the resolution of braille but uses more common characters.
-#* "tty" uses only 3 different symbols but will work with most fonts and should work in a real TTY.
-#* Note that "tty" only has half the horizontal resolution of the other two, so will show a shorter historical view.
-graph_symbol = "braille"
-
-# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
-graph_symbol_cpu = "default"
-
-# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
-graph_symbol_mem = "default"
-
-# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
-graph_symbol_net = "default"
-
-# Graph symbol to use for graphs in cpu box, "default", "braille", "block" or "tty".
-graph_symbol_proc = "default"
-
-#* Manually set which boxes to show. Available values are "cpu mem net proc", separate values with whitespace.
-shown_boxes = "cpu proc"
-
-#* Update time in milliseconds, recommended 2000 ms or above for better sample times for graphs.
-update_ms = 2000
-
-#* Processes sorting, "pid" "program" "arguments" "threads" "user" "memory" "cpu lazy" "cpu direct",
-#* "cpu lazy" sorts top process over time (easier to follow), "cpu direct" updates top process directly.
-proc_sorting = "memory"
-
-#* Reverse sorting order, True or False.
-proc_reversed = False
-
-#* Show processes as a tree.
-proc_tree = False
-
-#* Use the cpu graph colors in the process list.
-proc_colors = True
-
-#* Use a darkening gradient in the process list.
-proc_gradient = True
-
-#* If process cpu usage should be of the core it's running on or usage of the total available cpu power.
-proc_per_core = False
-
-#* Show process memory as bytes instead of percent.
-proc_mem_bytes = True
-
-#* Use /proc/[pid]/smaps for memory information in the process info box (very slow but more accurate)
-proc_info_smaps = False
-
-#* Show proc box on left side of screen instead of right.
-proc_left = False
-
-#* (Linux) Filter processes tied to the Linux kernel(similar behavior to htop).
-proc_filter_kernel = False
-
-#* Sets the CPU stat shown in upper half of the CPU graph, "total" is always available.
-#* Select from a list of detected attributes from the options menu.
-cpu_graph_upper = "total"
-
-#* Sets the CPU stat shown in lower half of the CPU graph, "total" is always available.
-#* Select from a list of detected attributes from the options menu.
-cpu_graph_lower = "total"
-
-#* Toggles if the lower CPU graph should be inverted.
-cpu_invert_lower = True
-
-#* Set to True to completely disable the lower CPU graph.
-cpu_single_graph = False
-
-#* Show cpu box at bottom of screen instead of top.
-cpu_bottom = False
-
-#* Shows the system uptime in the CPU box.
-show_uptime = True
-
-#* Show cpu temperature.
-check_temp = True
-
-#* Which sensor to use for cpu temperature, use options menu to select from list of available sensors.
-cpu_sensor = "Auto"
-
-#* Show temperatures for cpu cores also if check_temp is True and sensors has been found.
-show_coretemp = True
-
-#* Set a custom mapping between core and coretemp, can be needed on certain cpus to get correct temperature for correct core.
-#* Use lm-sensors or similar to see which cores are reporting temperatures on your machine.
-#* Format "x:y" x=core with wrong temp, y=core with correct temp, use space as separator between multiple entries.
-#* Example: "4:0 5:1 6:3"
-cpu_core_map = ""
-
-#* Which temperature scale to use, available values: "celsius", "fahrenheit", "kelvin" and "rankine".
-temp_scale = "celsius"
-
-#* Use base 10 for bits/bytes sizes, KB = 1000 instead of KiB = 1024.
-base_10_sizes = False
-
-#* Show CPU frequency.
-show_cpu_freq = True
-
-#* Draw a clock at top of screen, formatting according to strftime, empty string to disable.
-#* Special formatting: /host = hostname | /user = username | /uptime = system uptime
-clock_format = "%X"
-
-#* Update main ui in background when menus are showing, set this to false if the menus is flickering too much for comfort.
-background_update = True
-
-#* Custom cpu model name, empty string to disable.
-custom_cpu_name = ""
-
-#* Optional filter for shown disks, should be full path of a mountpoint, separate multiple values with whitespace " ".
-#* Begin line with "exclude=" to change to exclude filter, otherwise defaults to "most include" filter. Example: disks_filter="exclude=/boot /home/user".
-disks_filter = ""
-
-#* Show graphs instead of meters for memory values.
-mem_graphs = True
-
-#* Show mem box below net box instead of above.
-mem_below_net = False
-
-#* Count ZFS ARC in cached and available memory.
-zfs_arc_cached = True
-
-#* If swap memory should be shown in memory box.
-show_swap = True
-
-#* Show swap as a disk, ignores show_swap value above, inserts itself after first disk.
-swap_disk = True
-
-#* If mem box should be split to also show disks info.
-show_disks = True
-
-#* Filter out non physical disks. Set this to False to include network disks, RAM disks and similar.
-only_physical = True
-
-#* Read disks list from /etc/fstab. This also disables only_physical.
-use_fstab = True
-
-#* Set to true to show available disk space for privileged users.
-disk_free_priv = False
-
-#* Toggles if io activity % (disk busy time) should be shown in regular disk usage view.
-show_io_stat = True
-
-#* Toggles io mode for disks, showing big graphs for disk read/write speeds.
-io_mode = False
-
-#* Set to True to show combined read/write io graphs in io mode.
-io_graph_combined = False
-
-#* Set the top speed for the io graphs in MiB/s (100 by default), use format "mountpoint:speed" separate disks with whitespace " ".
-#* Example: "/mnt/media:100 /:20 /boot:1".
-io_graph_speeds = ""
-
-#* Set fixed values for network graphs in Mebibits. Is only used if net_auto is also set to False.
-net_download = 100
-
-net_upload = 100
-
-#* Use network graphs auto rescaling mode, ignores any values set above and rescales down to 10 Kibibytes at the lowest.
-net_auto = True
-
-#* Sync the auto scaling for download and upload to whichever currently has the highest scale.
-net_sync = True
-
-#* Starts with the Network Interface specified here.
-net_iface = ""
-
-#* Show battery stats in top right if battery is present.
-show_battery = True
-
-#* Which battery to use if multiple are present. "Auto" for auto detection.
-selected_battery = "Auto"
-
-#* Set loglevel for "~/.config/btop/btop.log" levels are: "ERROR" "WARNING" "INFO" "DEBUG".
-#* The level set includes all lower levels, i.e. "DEBUG" will show all logging info.
-log_level = "WARNING"
\ No newline at end of file