diff options
Diffstat (limited to 'init.lua')
| -rw-r--r-- | init.lua | 811 |
1 files changed, 4 insertions, 807 deletions
@@ -94,819 +94,16 @@ vim.g.maplocalleader = ' ' vim.g.have_nerd_font = false -- [[ Setting options ]] --- See `:help vim.opt` --- NOTE: You can change these options as you wish! --- For more options, you can see `:help option-list` - --- Make line numbers default -vim.opt.number = true --- You can also add relative line numbers, to help with jumping. --- Experiment for yourself to see if you like it! --- vim.opt.relativenumber = true - --- Enable mouse mode, can be useful for resizing splits for example! -vim.opt.mouse = 'a' - --- Don't show the mode, since it's already in the status line -vim.opt.showmode = false - --- Sync clipboard between OS and Neovim. --- Remove this option if you want your OS clipboard to remain independent. --- See `:help 'clipboard'` -vim.opt.clipboard = 'unnamedplus' - --- Enable break indent -vim.opt.breakindent = true - --- Save undo history -vim.opt.undofile = true - --- Case-insensitive searching UNLESS \C or one or more capital letters in the search term -vim.opt.ignorecase = true -vim.opt.smartcase = true - --- Keep signcolumn on by default -vim.opt.signcolumn = 'yes' - --- Decrease update time -vim.opt.updatetime = 250 - --- Decrease mapped sequence wait time --- Displays which-key popup sooner -vim.opt.timeoutlen = 300 - --- Configure how new splits should be opened -vim.opt.splitright = true -vim.opt.splitbelow = true - --- Sets how neovim will display certain whitespace characters in the editor. --- See `:help 'list'` --- and `:help 'listchars'` -vim.opt.list = true -vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' } - --- Preview substitutions live, as you type! -vim.opt.inccommand = 'split' - --- Show which line your cursor is on -vim.opt.cursorline = true - --- Minimal number of screen lines to keep above and below the cursor. -vim.opt.scrolloff = 10 +require 'options' -- [[ Basic Keymaps ]] --- See `:help vim.keymap.set()` - --- Set highlight on search, but clear on pressing <Esc> in normal mode -vim.opt.hlsearch = true -vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>') - --- Diagnostic keymaps -vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous [D]iagnostic message' }) -vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next [D]iagnostic message' }) -vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' }) -vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' }) - --- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier --- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which --- is not what someone will guess without a bit more experience. --- --- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping --- or just use <C-\><C-n> to exit terminal mode -vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' }) - --- TIP: Disable arrow keys in normal mode --- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>') --- vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>') --- vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>') --- vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>') - --- Keybinds to make split navigation easier. --- Use CTRL+<hjkl> to switch between windows --- --- See `:help wincmd` for a list of all window commands -vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' }) -vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' }) -vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' }) -vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' }) - --- [[ Basic Autocommands ]] --- See `:help lua-guide-autocommands` - --- Highlight when yanking (copying) text --- Try it with `yap` in normal mode --- See `:help vim.highlight.on_yank()` -vim.api.nvim_create_autocmd('TextYankPost', { - desc = 'Highlight when yanking (copying) text', - group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }), - callback = function() - vim.highlight.on_yank() - end, -}) +require 'keymaps' -- [[ Install `lazy.nvim` plugin manager ]] --- See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info -local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim' -if not vim.loop.fs_stat(lazypath) then - local lazyrepo = 'https://github.com/folke/lazy.nvim.git' - vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath } -end ---@diagnostic disable-next-line: undefined-field -vim.opt.rtp:prepend(lazypath) +require 'lazy-bootstrap' -- [[ Configure and install plugins ]] --- --- To check the current status of your plugins, run --- :Lazy --- --- You can press `?` in this menu for help. Use `:q` to close the window --- --- To update plugins you can run --- :Lazy update --- --- NOTE: Here is where you install your plugins. -require('lazy').setup({ - -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link). - 'tpope/vim-sleuth', -- Detect tabstop and shiftwidth automatically - - -- NOTE: Plugins can also be added by using a table, - -- with the first argument being the link and the following - -- keys can be used to configure plugin behavior/loading/etc. - -- - -- Use `opts = {}` to force a plugin to be loaded. - -- - -- This is equivalent to: - -- require('Comment').setup({}) - - -- "gc" to comment visual regions/lines - { 'numToStr/Comment.nvim', opts = {} }, - - -- Here is a more advanced example where we pass configuration - -- options to `gitsigns.nvim`. This is equivalent to the following Lua: - -- require('gitsigns').setup({ ... }) - -- - -- See `:help gitsigns` to understand what the configuration keys do - { -- Adds git related signs to the gutter, as well as utilities for managing changes - 'lewis6991/gitsigns.nvim', - opts = { - signs = { - add = { text = '+' }, - change = { text = '~' }, - delete = { text = '_' }, - topdelete = { text = '‾' }, - changedelete = { text = '~' }, - }, - }, - }, - - -- NOTE: Plugins can also be configured to run Lua code when they are loaded. - -- - -- This is often very useful to both group configuration, as well as handle - -- lazy loading plugins that don't need to be loaded immediately at startup. - -- - -- For example, in the following configuration, we use: - -- event = 'VimEnter' - -- - -- which loads which-key before all the UI elements are loaded. Events can be - -- normal autocommands events (`:help autocmd-events`). - -- - -- Then, because we use the `config` key, the configuration only runs - -- after the plugin has been loaded: - -- config = function() ... end - - { -- Useful plugin to show you pending keybinds. - 'folke/which-key.nvim', - event = 'VimEnter', -- Sets the loading event to 'VimEnter' - config = function() -- This is the function that runs, AFTER loading - require('which-key').setup() - - -- Document existing key chains - require('which-key').register { - ['<leader>c'] = { name = '[C]ode', _ = 'which_key_ignore' }, - ['<leader>d'] = { name = '[D]ocument', _ = 'which_key_ignore' }, - ['<leader>r'] = { name = '[R]ename', _ = 'which_key_ignore' }, - ['<leader>s'] = { name = '[S]earch', _ = 'which_key_ignore' }, - ['<leader>w'] = { name = '[W]orkspace', _ = 'which_key_ignore' }, - ['<leader>t'] = { name = '[T]oggle', _ = 'which_key_ignore' }, - ['<leader>h'] = { name = 'Git [H]unk', _ = 'which_key_ignore' }, - } - -- visual mode - require('which-key').register({ - ['<leader>h'] = { 'Git [H]unk' }, - }, { mode = 'v' }) - end, - }, - - -- NOTE: Plugins can specify dependencies. - -- - -- The dependencies are proper plugin specifications as well - anything - -- you do for a plugin at the top level, you can do for a dependency. - -- - -- Use the `dependencies` key to specify the dependencies of a particular plugin - - { -- Fuzzy Finder (files, lsp, etc) - 'nvim-telescope/telescope.nvim', - event = 'VimEnter', - branch = '0.1.x', - dependencies = { - 'nvim-lua/plenary.nvim', - { -- If encountering errors, see telescope-fzf-native README for installation instructions - 'nvim-telescope/telescope-fzf-native.nvim', - - -- `build` is used to run some command when the plugin is installed/updated. - -- This is only run then, not every time Neovim starts up. - build = 'make', - - -- `cond` is a condition used to determine whether this plugin should be - -- installed and loaded. - cond = function() - return vim.fn.executable 'make' == 1 - end, - }, - { 'nvim-telescope/telescope-ui-select.nvim' }, - - -- Useful for getting pretty icons, but requires a Nerd Font. - { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font }, - }, - config = function() - -- Telescope is a fuzzy finder that comes with a lot of different things that - -- it can fuzzy find! It's more than just a "file finder", it can search - -- many different aspects of Neovim, your workspace, LSP, and more! - -- - -- The easiest way to use Telescope, is to start by doing something like: - -- :Telescope help_tags - -- - -- After running this command, a window will open up and you're able to - -- type in the prompt window. You'll see a list of `help_tags` options and - -- a corresponding preview of the help. - -- - -- Two important keymaps to use while in Telescope are: - -- - Insert mode: <c-/> - -- - Normal mode: ? - -- - -- This opens a window that shows you all of the keymaps for the current - -- Telescope picker. This is really useful to discover what Telescope can - -- do as well as how to actually do it! - - -- [[ Configure Telescope ]] - -- See `:help telescope` and `:help telescope.setup()` - require('telescope').setup { - -- You can put your default mappings / updates / etc. in here - -- All the info you're looking for is in `:help telescope.setup()` - -- - -- defaults = { - -- mappings = { - -- i = { ['<c-enter>'] = 'to_fuzzy_refine' }, - -- }, - -- }, - -- pickers = {} - extensions = { - ['ui-select'] = { - require('telescope.themes').get_dropdown(), - }, - }, - } - - -- Enable Telescope extensions if they are installed - pcall(require('telescope').load_extension, 'fzf') - pcall(require('telescope').load_extension, 'ui-select') - - -- See `:help telescope.builtin` - local builtin = require 'telescope.builtin' - vim.keymap.set('n', '<leader>sh', builtin.help_tags, { desc = '[S]earch [H]elp' }) - vim.keymap.set('n', '<leader>sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' }) - vim.keymap.set('n', '<leader>sf', builtin.find_files, { desc = '[S]earch [F]iles' }) - vim.keymap.set('n', '<leader>ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' }) - vim.keymap.set('n', '<leader>sw', builtin.grep_string, { desc = '[S]earch current [W]ord' }) - vim.keymap.set('n', '<leader>sg', builtin.live_grep, { desc = '[S]earch by [G]rep' }) - vim.keymap.set('n', '<leader>sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' }) - vim.keymap.set('n', '<leader>sr', builtin.resume, { desc = '[S]earch [R]esume' }) - vim.keymap.set('n', '<leader>s.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' }) - vim.keymap.set('n', '<leader><leader>', builtin.buffers, { desc = '[ ] Find existing buffers' }) - - -- Slightly advanced example of overriding default behavior and theme - vim.keymap.set('n', '<leader>/', function() - -- You can pass additional configuration to Telescope to change the theme, layout, etc. - builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown { - winblend = 10, - previewer = false, - }) - end, { desc = '[/] Fuzzily search in current buffer' }) - - -- It's also possible to pass additional configuration options. - -- See `:help telescope.builtin.live_grep()` for information about particular keys - vim.keymap.set('n', '<leader>s/', function() - builtin.live_grep { - grep_open_files = true, - prompt_title = 'Live Grep in Open Files', - } - end, { desc = '[S]earch [/] in Open Files' }) - - -- Shortcut for searching your Neovim configuration files - vim.keymap.set('n', '<leader>sn', function() - builtin.find_files { cwd = vim.fn.stdpath 'config' } - end, { desc = '[S]earch [N]eovim files' }) - end, - }, - - { -- LSP Configuration & Plugins - 'neovim/nvim-lspconfig', - dependencies = { - -- Automatically install LSPs and related tools to stdpath for Neovim - { 'williamboman/mason.nvim', config = true }, -- NOTE: Must be loaded before dependants - 'williamboman/mason-lspconfig.nvim', - 'WhoIsSethDaniel/mason-tool-installer.nvim', - - -- Useful status updates for LSP. - -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})` - { 'j-hui/fidget.nvim', opts = {} }, - - -- `neodev` configures Lua LSP for your Neovim config, runtime and plugins - -- used for completion, annotations and signatures of Neovim apis - { 'folke/neodev.nvim', opts = {} }, - }, - config = function() - -- Brief aside: **What is LSP?** - -- - -- LSP is an initialism you've probably heard, but might not understand what it is. - -- - -- LSP stands for Language Server Protocol. It's a protocol that helps editors - -- and language tooling communicate in a standardized fashion. - -- - -- In general, you have a "server" which is some tool built to understand a particular - -- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc.). These Language Servers - -- (sometimes called LSP servers, but that's kind of like ATM Machine) are standalone - -- processes that communicate with some "client" - in this case, Neovim! - -- - -- LSP provides Neovim with features like: - -- - Go to definition - -- - Find references - -- - Autocompletion - -- - Symbol Search - -- - and more! - -- - -- Thus, Language Servers are external tools that must be installed separately from - -- Neovim. This is where `mason` and related plugins come into play. - -- - -- If you're wondering about lsp vs treesitter, you can check out the wonderfully - -- and elegantly composed help section, `:help lsp-vs-treesitter` - - -- This function gets run when an LSP attaches to a particular buffer. - -- That is to say, every time a new file is opened that is associated with - -- an lsp (for example, opening `main.rs` is associated with `rust_analyzer`) this - -- function will be executed to configure the current buffer - vim.api.nvim_create_autocmd('LspAttach', { - group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }), - callback = function(event) - -- NOTE: Remember that Lua is a real programming language, and as such it is possible - -- to define small helper and utility functions so you don't have to repeat yourself. - -- - -- In this case, we create a function that lets us more easily define mappings specific - -- for LSP related items. It sets the mode, buffer and description for us each time. - local map = function(keys, func, desc) - vim.keymap.set('n', keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc }) - end - - -- Jump to the definition of the word under your cursor. - -- This is where a variable was first declared, or where a function is defined, etc. - -- To jump back, press <C-t>. - map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition') - - -- Find references for the word under your cursor. - map('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences') - - -- Jump to the implementation of the word under your cursor. - -- Useful when your language has ways of declaring types without an actual implementation. - map('gI', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation') - - -- Jump to the type of the word under your cursor. - -- Useful when you're not sure what type a variable is and you want to see - -- the definition of its *type*, not where it was *defined*. - map('<leader>D', require('telescope.builtin').lsp_type_definitions, 'Type [D]efinition') - - -- Fuzzy find all the symbols in your current document. - -- Symbols are things like variables, functions, types, etc. - map('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols') - - -- Fuzzy find all the symbols in your current workspace. - -- Similar to document symbols, except searches over your entire project. - map('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols') - - -- Rename the variable under your cursor. - -- Most Language Servers support renaming across files, etc. - map('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame') - - -- Execute a code action, usually your cursor needs to be on top of an error - -- or a suggestion from your LSP for this to activate. - map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction') - - -- Opens a popup that displays documentation about the word under your cursor - -- See `:help K` for why this keymap. - map('K', vim.lsp.buf.hover, 'Hover Documentation') - - -- WARN: This is not Goto Definition, this is Goto Declaration. - -- For example, in C this would take you to the header. - map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration') - - -- The following two autocommands are used to highlight references of the - -- word under your cursor when your cursor rests there for a little while. - -- See `:help CursorHold` for information about when this is executed - -- - -- When you move your cursor, the highlights will be cleared (the second autocommand). - local client = vim.lsp.get_client_by_id(event.data.client_id) - if client and client.server_capabilities.documentHighlightProvider then - local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false }) - vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, { - buffer = event.buf, - group = highlight_augroup, - callback = vim.lsp.buf.document_highlight, - }) - - vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, { - buffer = event.buf, - group = highlight_augroup, - callback = vim.lsp.buf.clear_references, - }) - - vim.api.nvim_create_autocmd('LspDetach', { - group = vim.api.nvim_create_augroup('kickstart-lsp-detach', { clear = true }), - callback = function(event2) - vim.lsp.buf.clear_references() - vim.api.nvim_clear_autocmds { group = 'kickstart-lsp-highlight', buffer = event2.buf } - end, - }) - end - - -- The following autocommand is used to enable inlay hints in your - -- code, if the language server you are using supports them - -- - -- This may be unwanted, since they displace some of your code - if client and client.server_capabilities.inlayHintProvider and vim.lsp.inlay_hint then - map('<leader>th', function() - vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled()) - end, '[T]oggle Inlay [H]ints') - end - end, - }) - - -- LSP servers and clients are able to communicate to each other what features they support. - -- By default, Neovim doesn't support everything that is in the LSP specification. - -- When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities. - -- So, we create new capabilities with nvim cmp, and then broadcast that to the servers. - local capabilities = vim.lsp.protocol.make_client_capabilities() - capabilities = vim.tbl_deep_extend('force', capabilities, require('cmp_nvim_lsp').default_capabilities()) - - -- Enable the following language servers - -- Feel free to add/remove any LSPs that you want here. They will automatically be installed. - -- - -- Add any additional override configuration in the following tables. Available keys are: - -- - cmd (table): Override the default command used to start the server - -- - filetypes (table): Override the default list of associated filetypes for the server - -- - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features. - -- - settings (table): Override the default settings passed when initializing the server. - -- For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/ - local servers = { - -- clangd = {}, - -- gopls = {}, - -- pyright = {}, - -- rust_analyzer = {}, - -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs - -- - -- Some languages (like typescript) have entire language plugins that can be useful: - -- https://github.com/pmizio/typescript-tools.nvim - -- - -- But for many setups, the LSP (`tsserver`) will work just fine - -- tsserver = {}, - -- - - lua_ls = { - -- cmd = {...}, - -- filetypes = { ...}, - -- capabilities = {}, - settings = { - Lua = { - completion = { - callSnippet = 'Replace', - }, - -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings - -- diagnostics = { disable = { 'missing-fields' } }, - }, - }, - }, - } - - -- Ensure the servers and tools above are installed - -- To check the current status of installed tools and/or manually install - -- other tools, you can run - -- :Mason - -- - -- You can press `g?` for help in this menu. - require('mason').setup() - - -- You can add other tools here that you want Mason to install - -- for you, so that they are available from within Neovim. - local ensure_installed = vim.tbl_keys(servers or {}) - vim.list_extend(ensure_installed, { - 'stylua', -- Used to format Lua code - }) - require('mason-tool-installer').setup { ensure_installed = ensure_installed } - - require('mason-lspconfig').setup { - handlers = { - function(server_name) - local server = servers[server_name] or {} - -- This handles overriding only values explicitly passed - -- by the server configuration above. Useful when disabling - -- certain features of an LSP (for example, turning off formatting for tsserver) - server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {}) - require('lspconfig')[server_name].setup(server) - end, - }, - } - end, - }, - - { -- Autoformat - 'stevearc/conform.nvim', - lazy = false, - keys = { - { - '<leader>f', - function() - require('conform').format { async = true, lsp_fallback = true } - end, - mode = '', - desc = '[F]ormat buffer', - }, - }, - opts = { - notify_on_error = false, - format_on_save = function(bufnr) - -- Disable "format_on_save lsp_fallback" for languages that don't - -- have a well standardized coding style. You can add additional - -- languages here or re-enable it for the disabled ones. - local disable_filetypes = { c = true, cpp = true } - return { - timeout_ms = 500, - lsp_fallback = not disable_filetypes[vim.bo[bufnr].filetype], - } - end, - formatters_by_ft = { - lua = { 'stylua' }, - -- Conform can also run multiple formatters sequentially - -- python = { "isort", "black" }, - -- - -- You can use a sub-list to tell conform to run *until* a formatter - -- is found. - -- javascript = { { "prettierd", "prettier" } }, - }, - }, - }, - - { -- Autocompletion - 'hrsh7th/nvim-cmp', - event = 'InsertEnter', - dependencies = { - -- Snippet Engine & its associated nvim-cmp source - { - 'L3MON4D3/LuaSnip', - build = (function() - -- Build Step is needed for regex support in snippets. - -- This step is not supported in many windows environments. - -- Remove the below condition to re-enable on windows. - if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then - return - end - return 'make install_jsregexp' - end)(), - dependencies = { - -- `friendly-snippets` contains a variety of premade snippets. - -- See the README about individual language/framework/plugin snippets: - -- https://github.com/rafamadriz/friendly-snippets - -- { - -- 'rafamadriz/friendly-snippets', - -- config = function() - -- require('luasnip.loaders.from_vscode').lazy_load() - -- end, - -- }, - }, - }, - 'saadparwaiz1/cmp_luasnip', - - -- Adds other completion capabilities. - -- nvim-cmp does not ship with all sources by default. They are split - -- into multiple repos for maintenance purposes. - 'hrsh7th/cmp-nvim-lsp', - 'hrsh7th/cmp-path', - }, - config = function() - -- See `:help cmp` - local cmp = require 'cmp' - local luasnip = require 'luasnip' - luasnip.config.setup {} - - cmp.setup { - snippet = { - expand = function(args) - luasnip.lsp_expand(args.body) - end, - }, - completion = { completeopt = 'menu,menuone,noinsert' }, - - -- For an understanding of why these mappings were - -- chosen, you will need to read `:help ins-completion` - -- - -- No, but seriously. Please read `:help ins-completion`, it is really good! - mapping = cmp.mapping.preset.insert { - -- Select the [n]ext item - ['<C-n>'] = cmp.mapping.select_next_item(), - -- Select the [p]revious item - ['<C-p>'] = cmp.mapping.select_prev_item(), - - -- Scroll the documentation window [b]ack / [f]orward - ['<C-b>'] = cmp.mapping.scroll_docs(-4), - ['<C-f>'] = cmp.mapping.scroll_docs(4), - - -- Accept ([y]es) the completion. - -- This will auto-import if your LSP supports it. - -- This will expand snippets if the LSP sent a snippet. - ['<C-y>'] = cmp.mapping.confirm { select = true }, - - -- If you prefer more traditional completion keymaps, - -- you can uncomment the following lines - --['<CR>'] = cmp.mapping.confirm { select = true }, - --['<Tab>'] = cmp.mapping.select_next_item(), - --['<S-Tab>'] = cmp.mapping.select_prev_item(), - - -- Manually trigger a completion from nvim-cmp. - -- Generally you don't need this, because nvim-cmp will display - -- completions whenever it has completion options available. - ['<C-Space>'] = cmp.mapping.complete {}, - - -- Think of <c-l> as moving to the right of your snippet expansion. - -- So if you have a snippet that's like: - -- function $name($args) - -- $body - -- end - -- - -- <c-l> will move you to the right of each of the expansion locations. - -- <c-h> is similar, except moving you backwards. - ['<C-l>'] = cmp.mapping(function() - if luasnip.expand_or_locally_jumpable() then - luasnip.expand_or_jump() - end - end, { 'i', 's' }), - ['<C-h>'] = cmp.mapping(function() - if luasnip.locally_jumpable(-1) then - luasnip.jump(-1) - end - end, { 'i', 's' }), - - -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see: - -- https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps - }, - sources = { - { name = 'nvim_lsp' }, - { name = 'luasnip' }, - { name = 'path' }, - }, - } - end, - }, - - { -- You can easily change to a different colorscheme. - -- Change the name of the colorscheme plugin below, and then - -- change the command in the config to whatever the name of that colorscheme is. - -- - -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`. - 'folke/tokyonight.nvim', - priority = 1000, -- Make sure to load this before all the other start plugins. - init = function() - -- Load the colorscheme here. - -- Like many other themes, this one has different styles, and you could load - -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'. - vim.cmd.colorscheme 'tokyonight-night' - - -- You can configure highlights by doing something like: - vim.cmd.hi 'Comment gui=none' - end, - }, - - -- Highlight todo, notes, etc in comments - { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } }, - - { -- Collection of various small independent plugins/modules - 'echasnovski/mini.nvim', - config = function() - -- Better Around/Inside textobjects - -- - -- Examples: - -- - va) - [V]isually select [A]round [)]paren - -- - yinq - [Y]ank [I]nside [N]ext [']quote - -- - ci' - [C]hange [I]nside [']quote - require('mini.ai').setup { n_lines = 500 } - - -- Add/delete/replace surroundings (brackets, quotes, etc.) - -- - -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren - -- - sd' - [S]urround [D]elete [']quotes - -- - sr)' - [S]urround [R]eplace [)] ['] - require('mini.surround').setup() - - -- Simple and easy statusline. - -- You could remove this setup call if you don't like it, - -- and try some other statusline plugin - local statusline = require 'mini.statusline' - -- set use_icons to true if you have a Nerd Font - statusline.setup { use_icons = vim.g.have_nerd_font } - - -- You can configure sections in the statusline by overriding their - -- default behavior. For example, here we set the section for - -- cursor location to LINE:COLUMN - ---@diagnostic disable-next-line: duplicate-set-field - statusline.section_location = function() - return '%2l:%-2v' - end - - -- ... and there is more! - -- Check out: https://github.com/echasnovski/mini.nvim - end, - }, - { -- Highlight, edit, and navigate code - 'nvim-treesitter/nvim-treesitter', - build = ':TSUpdate', - opts = { - ensure_installed = { 'bash', 'c', 'html', 'lua', 'luadoc', 'markdown', 'vim', 'vimdoc' }, - -- Autoinstall languages that are not installed - auto_install = true, - highlight = { - enable = true, - -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules. - -- If you are experiencing weird indenting issues, add the language to - -- the list of additional_vim_regex_highlighting and disabled languages for indent. - additional_vim_regex_highlighting = { 'ruby' }, - }, - indent = { enable = true, disable = { 'ruby' } }, - }, - config = function(_, opts) - -- [[ Configure Treesitter ]] See `:help nvim-treesitter` - - -- Prefer git instead of curl in order to improve connectivity in some environments - require('nvim-treesitter.install').prefer_git = true - ---@diagnostic disable-next-line: missing-fields - require('nvim-treesitter.configs').setup(opts) - - -- There are additional nvim-treesitter modules that you can use to interact - -- with nvim-treesitter. You should go explore a few and see what interests you: - -- - -- - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod` - -- - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context - -- - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects - end, - }, - - -- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the - -- init.lua. If you want these files, they are in the repository, so you can just download them and - -- place them in the correct locations. - - -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for Kickstart - -- - -- Here are some example plugins that I've included in the Kickstart repository. - -- Uncomment any of the lines below to enable them (you will need to restart nvim). - -- - -- require 'kickstart.plugins.debug', - -- require 'kickstart.plugins.indent_line', - -- require 'kickstart.plugins.lint', - -- require 'kickstart.plugins.autopairs', - -- require 'kickstart.plugins.neo-tree', - -- require 'kickstart.plugins.gitsigns', -- adds gitsigns recommend keymaps - - -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua` - -- This is the easiest way to modularize your config. - -- - -- Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going. - -- For additional information, see `:help lazy.nvim-lazy.nvim-structuring-your-plugins` - -- { import = 'custom.plugins' }, -}, { - ui = { - -- If you are using a Nerd Font: set icons to an empty table which will use the - -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table - icons = vim.g.have_nerd_font and {} or { - cmd = '⌘', - config = '🛠', - event = '📅', - ft = '📂', - init = '⚙', - keys = '🗝', - plugin = '🔌', - runtime = '💻', - require = '🌙', - source = '📄', - start = '🚀', - task = '📌', - lazy = '💤 ', - }, - }, -}) +require 'lazy-plugins' -- The line beneath this is called `modeline`. See `:help modeline` -- vim: ts=2 sts=2 sw=2 et |