aboutsummaryrefslogtreecommitdiff
path: root/lua
diff options
context:
space:
mode:
Diffstat (limited to 'lua')
-rw-r--r--lua/keymaps.lua51
-rw-r--r--lua/kickstart/plugins/cmp.lua113
-rw-r--r--lua/kickstart/plugins/conform.lua39
-rw-r--r--lua/kickstart/plugins/gitsigns.lua19
-rw-r--r--lua/kickstart/plugins/lspconfig.lua219
-rw-r--r--lua/kickstart/plugins/mini.lua40
-rw-r--r--lua/kickstart/plugins/telescope.lua114
-rw-r--r--lua/kickstart/plugins/todo-comments.lua5
-rw-r--r--lua/kickstart/plugins/tokyonight.lua20
-rw-r--r--lua/kickstart/plugins/treesitter.lua35
-rw-r--r--lua/kickstart/plugins/which-key.lua40
-rw-r--r--lua/lazy-bootstrap.lua10
-rw-r--r--lua/lazy-plugins.lua94
-rw-r--r--lua/options.lua62
14 files changed, 856 insertions, 5 deletions
diff --git a/lua/keymaps.lua b/lua/keymaps.lua
new file mode 100644
index 0000000..c6c87b1
--- /dev/null
+++ b/lua/keymaps.lua
@@ -0,0 +1,51 @@
+-- [[ Basic Keymaps ]]
+-- See `:help vim.keymap.set()`
+
+-- Set highlight on search, but clear on pressing <Esc> in normal mode
+vim.opt.hlsearch = true
+vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')
+
+-- Diagnostic keymaps
+vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous [D]iagnostic message' })
+vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next [D]iagnostic message' })
+vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' })
+vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })
+
+-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
+-- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which
+-- is not what someone will guess without a bit more experience.
+--
+-- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping
+-- or just use <C-\><C-n> to exit terminal mode
+vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })
+
+-- TIP: Disable arrow keys in normal mode
+-- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
+-- vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
+-- vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
+-- vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')
+
+-- Keybinds to make split navigation easier.
+-- Use CTRL+<hjkl> to switch between windows
+--
+-- See `:help wincmd` for a list of all window commands
+vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
+vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
+vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
+vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })
+
+-- [[ Basic Autocommands ]]
+-- See `:help lua-guide-autocommands`
+
+-- Highlight when yanking (copying) text
+-- Try it with `yap` in normal mode
+-- See `:help vim.highlight.on_yank()`
+vim.api.nvim_create_autocmd('TextYankPost', {
+ desc = 'Highlight when yanking (copying) text',
+ group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
+ callback = function()
+ vim.highlight.on_yank()
+ end,
+})
+
+-- vim: ts=2 sts=2 sw=2 et
diff --git a/lua/kickstart/plugins/cmp.lua b/lua/kickstart/plugins/cmp.lua
new file mode 100644
index 0000000..de63086
--- /dev/null
+++ b/lua/kickstart/plugins/cmp.lua
@@ -0,0 +1,113 @@
+return {
+ { -- Autocompletion
+ 'hrsh7th/nvim-cmp',
+ event = 'InsertEnter',
+ dependencies = {
+ -- Snippet Engine & its associated nvim-cmp source
+ {
+ 'L3MON4D3/LuaSnip',
+ build = (function()
+ -- Build Step is needed for regex support in snippets.
+ -- This step is not supported in many windows environments.
+ -- Remove the below condition to re-enable on windows.
+ if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then
+ return
+ end
+ return 'make install_jsregexp'
+ end)(),
+ dependencies = {
+ -- `friendly-snippets` contains a variety of premade snippets.
+ -- See the README about individual language/framework/plugin snippets:
+ -- https://github.com/rafamadriz/friendly-snippets
+ -- {
+ -- 'rafamadriz/friendly-snippets',
+ -- config = function()
+ -- require('luasnip.loaders.from_vscode').lazy_load()
+ -- end,
+ -- },
+ },
+ },
+ 'saadparwaiz1/cmp_luasnip',
+
+ -- Adds other completion capabilities.
+ -- nvim-cmp does not ship with all sources by default. They are split
+ -- into multiple repos for maintenance purposes.
+ 'hrsh7th/cmp-nvim-lsp',
+ 'hrsh7th/cmp-path',
+ },
+ config = function()
+ -- See `:help cmp`
+ local cmp = require 'cmp'
+ local luasnip = require 'luasnip'
+ luasnip.config.setup {}
+
+ cmp.setup {
+ snippet = {
+ expand = function(args)
+ luasnip.lsp_expand(args.body)
+ end,
+ },
+ completion = { completeopt = 'menu,menuone,noinsert' },
+
+ -- For an understanding of why these mappings were
+ -- chosen, you will need to read `:help ins-completion`
+ --
+ -- No, but seriously. Please read `:help ins-completion`, it is really good!
+ mapping = cmp.mapping.preset.insert {
+ -- Select the [n]ext item
+ ['<C-n>'] = cmp.mapping.select_next_item(),
+ -- Select the [p]revious item
+ ['<C-p>'] = cmp.mapping.select_prev_item(),
+
+ -- Scroll the documentation window [b]ack / [f]orward
+ ['<C-b>'] = cmp.mapping.scroll_docs(-4),
+ ['<C-f>'] = cmp.mapping.scroll_docs(4),
+
+ -- Accept ([y]es) the completion.
+ -- This will auto-import if your LSP supports it.
+ -- This will expand snippets if the LSP sent a snippet.
+ ['<C-y>'] = cmp.mapping.confirm { select = true },
+
+ -- If you prefer more traditional completion keymaps,
+ -- you can uncomment the following lines
+ --['<CR>'] = cmp.mapping.confirm { select = true },
+ --['<Tab>'] = cmp.mapping.select_next_item(),
+ --['<S-Tab>'] = cmp.mapping.select_prev_item(),
+
+ -- Manually trigger a completion from nvim-cmp.
+ -- Generally you don't need this, because nvim-cmp will display
+ -- completions whenever it has completion options available.
+ ['<C-Space>'] = cmp.mapping.complete {},
+
+ -- Think of <c-l> as moving to the right of your snippet expansion.
+ -- So if you have a snippet that's like:
+ -- function $name($args)
+ -- $body
+ -- end
+ --
+ -- <c-l> will move you to the right of each of the expansion locations.
+ -- <c-h> is similar, except moving you backwards.
+ ['<C-l>'] = cmp.mapping(function()
+ if luasnip.expand_or_locally_jumpable() then
+ luasnip.expand_or_jump()
+ end
+ end, { 'i', 's' }),
+ ['<C-h>'] = cmp.mapping(function()
+ if luasnip.locally_jumpable(-1) then
+ luasnip.jump(-1)
+ end
+ end, { 'i', 's' }),
+
+ -- For more advanced Luasnip keymaps (e.g. selecting choice nodes, expansion) see:
+ -- https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
+ },
+ sources = {
+ { name = 'nvim_lsp' },
+ { name = 'luasnip' },
+ { name = 'path' },
+ },
+ }
+ end,
+ },
+}
+-- vim: ts=2 sts=2 sw=2 et
diff --git a/lua/kickstart/plugins/conform.lua b/lua/kickstart/plugins/conform.lua
new file mode 100644
index 0000000..5057737
--- /dev/null
+++ b/lua/kickstart/plugins/conform.lua
@@ -0,0 +1,39 @@
+return {
+ { -- Autoformat
+ 'stevearc/conform.nvim',
+ lazy = false,
+ keys = {
+ {
+ '<leader>f',
+ function()
+ require('conform').format { async = true, lsp_fallback = true }
+ end,
+ mode = '',
+ desc = '[F]ormat buffer',
+ },
+ },
+ opts = {
+ notify_on_error = false,
+ format_on_save = function(bufnr)
+ -- Disable "format_on_save lsp_fallback" for languages that don't
+ -- have a well standardized coding style. You can add additional
+ -- languages here or re-enable it for the disabled ones.
+ local disable_filetypes = { c = true, cpp = true }
+ return {
+ timeout_ms = 500,
+ lsp_fallback = not disable_filetypes[vim.bo[bufnr].filetype],
+ }
+ end,
+ formatters_by_ft = {
+ lua = { 'stylua' },
+ -- Conform can also run multiple formatters sequentially
+ -- python = { "isort", "black" },
+ --
+ -- You can use a sub-list to tell conform to run *until* a formatter
+ -- is found.
+ -- javascript = { { "prettierd", "prettier" } },
+ },
+ },
+ },
+}
+-- vim: ts=2 sts=2 sw=2 et
diff --git a/lua/kickstart/plugins/gitsigns.lua b/lua/kickstart/plugins/gitsigns.lua
index 4bcc70f..b8918ce 100644
--- a/lua/kickstart/plugins/gitsigns.lua
+++ b/lua/kickstart/plugins/gitsigns.lua
@@ -1,11 +1,19 @@
--- Adds git related signs to the gutter, as well as utilities for managing changes
--- NOTE: gitsigns is already included in init.lua but contains only the base
--- config. This will add also the recommended keymaps.
-
+-- Here is a more advanced example where we pass configuration
+-- options to `gitsigns.nvim`. This is equivalent to the following Lua:
+-- require('gitsigns').setup({ ... })
+--
+-- See `:help gitsigns` to understand what the configuration keys do
return {
- {
+ { -- Adds git related signs to the gutter, as well as utilities for managing changes
'lewis6991/gitsigns.nvim',
opts = {
+ signs = {
+ add = { text = '+' },
+ change = { text = '~' },
+ delete = { text = '_' },
+ topdelete = { text = 'β€Ύ' },
+ changedelete = { text = '~' },
+ },
on_attach = function(bufnr)
local gitsigns = require 'gitsigns'
@@ -59,3 +67,4 @@ return {
},
},
}
+-- vim: ts=2 sts=2 sw=2 et
diff --git a/lua/kickstart/plugins/lspconfig.lua b/lua/kickstart/plugins/lspconfig.lua
new file mode 100644
index 0000000..5f9220b
--- /dev/null
+++ b/lua/kickstart/plugins/lspconfig.lua
@@ -0,0 +1,219 @@
+return {
+ { -- LSP Configuration & Plugins
+ 'neovim/nvim-lspconfig',
+ dependencies = {
+ -- Automatically install LSPs and related tools to stdpath for Neovim
+ { 'williamboman/mason.nvim', config = true }, -- NOTE: Must be loaded before dependants
+ 'williamboman/mason-lspconfig.nvim',
+ 'WhoIsSethDaniel/mason-tool-installer.nvim',
+
+ -- Useful status updates for LSP.
+ -- NOTE: `opts = {}` is the same as calling `require('fidget').setup({})`
+ { 'j-hui/fidget.nvim', opts = {} },
+
+ -- `neodev` configures Lua LSP for your Neovim config, runtime and plugins
+ -- used for completion, annotations and signatures of Neovim apis
+ { 'folke/neodev.nvim', opts = {} },
+ },
+ config = function()
+ -- Brief aside: **What is LSP?**
+ --
+ -- LSP is an initialism you've probably heard, but might not understand what it is.
+ --
+ -- LSP stands for Language Server Protocol. It's a protocol that helps editors
+ -- and language tooling communicate in a standardized fashion.
+ --
+ -- In general, you have a "server" which is some tool built to understand a particular
+ -- language (such as `gopls`, `lua_ls`, `rust_analyzer`, etc.). These Language Servers
+ -- (sometimes called LSP servers, but that's kind of like ATM Machine) are standalone
+ -- processes that communicate with some "client" - in this case, Neovim!
+ --
+ -- LSP provides Neovim with features like:
+ -- - Go to definition
+ -- - Find references
+ -- - Autocompletion
+ -- - Symbol Search
+ -- - and more!
+ --
+ -- Thus, Language Servers are external tools that must be installed separately from
+ -- Neovim. This is where `mason` and related plugins come into play.
+ --
+ -- If you're wondering about lsp vs treesitter, you can check out the wonderfully
+ -- and elegantly composed help section, `:help lsp-vs-treesitter`
+
+ -- This function gets run when an LSP attaches to a particular buffer.
+ -- That is to say, every time a new file is opened that is associated with
+ -- an lsp (for example, opening `main.rs` is associated with `rust_analyzer`) this
+ -- function will be executed to configure the current buffer
+ vim.api.nvim_create_autocmd('LspAttach', {
+ group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }),
+ callback = function(event)
+ -- NOTE: Remember that Lua is a real programming language, and as such it is possible
+ -- to define small helper and utility functions so you don't have to repeat yourself.
+ --
+ -- In this case, we create a function that lets us more easily define mappings specific
+ -- for LSP related items. It sets the mode, buffer and description for us each time.
+ local map = function(keys, func, desc)
+ vim.keymap.set('n', keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc })
+ end
+
+ -- Jump to the definition of the word under your cursor.
+ -- This is where a variable was first declared, or where a function is defined, etc.
+ -- To jump back, press <C-t>.
+ map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
+
+ -- Find references for the word under your cursor.
+ map('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
+
+ -- Jump to the implementation of the word under your cursor.
+ -- Useful when your language has ways of declaring types without an actual implementation.
+ map('gI', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')
+
+ -- Jump to the type of the word under your cursor.
+ -- Useful when you're not sure what type a variable is and you want to see
+ -- the definition of its *type*, not where it was *defined*.
+ map('<leader>D', require('telescope.builtin').lsp_type_definitions, 'Type [D]efinition')
+
+ -- Fuzzy find all the symbols in your current document.
+ -- Symbols are things like variables, functions, types, etc.
+ map('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols')
+
+ -- Fuzzy find all the symbols in your current workspace.
+ -- Similar to document symbols, except searches over your entire project.
+ map('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols')
+
+ -- Rename the variable under your cursor.
+ -- Most Language Servers support renaming across files, etc.
+ map('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')
+
+ -- Execute a code action, usually your cursor needs to be on top of an error
+ -- or a suggestion from your LSP for this to activate.
+ map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction')
+
+ -- Opens a popup that displays documentation about the word under your cursor
+ -- See `:help K` for why this keymap.
+ map('K', vim.lsp.buf.hover, 'Hover Documentation')
+
+ -- WARN: This is not Goto Definition, this is Goto Declaration.
+ -- For example, in C this would take you to the header.
+ map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
+
+ -- The following two autocommands are used to highlight references of the
+ -- word under your cursor when your cursor rests there for a little while.
+ -- See `:help CursorHold` for information about when this is executed
+ --
+ -- When you move your cursor, the highlights will be cleared (the second autocommand).
+ local client = vim.lsp.get_client_by_id(event.data.client_id)
+ if client and client.server_capabilities.documentHighlightProvider then
+ local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false })
+ vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
+ buffer = event.buf,
+ group = highlight_augroup,
+ callback = vim.lsp.buf.document_highlight,
+ })
+
+ vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, {
+ buffer = event.buf,
+ group = highlight_augroup,
+ callback = vim.lsp.buf.clear_references,
+ })
+
+ vim.api.nvim_create_autocmd('LspDetach', {
+ group = vim.api.nvim_create_augroup('kickstart-lsp-detach', { clear = true }),
+ callback = function(event2)
+ vim.lsp.buf.clear_references()
+ vim.api.nvim_clear_autocmds { group = 'kickstart-lsp-highlight', buffer = event2.buf }
+ end,
+ })
+ end
+
+ -- The following autocommand is used to enable inlay hints in your
+ -- code, if the language server you are using supports them
+ --
+ -- This may be unwanted, since they displace some of your code
+ if client and client.server_capabilities.inlayHintProvider and vim.lsp.inlay_hint then
+ map('<leader>th', function()
+ vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled())
+ end, '[T]oggle Inlay [H]ints')
+ end
+ end,
+ })
+
+ -- LSP servers and clients are able to communicate to each other what features they support.
+ -- By default, Neovim doesn't support everything that is in the LSP specification.
+ -- When you add nvim-cmp, luasnip, etc. Neovim now has *more* capabilities.
+ -- So, we create new capabilities with nvim cmp, and then broadcast that to the servers.
+ local capabilities = vim.lsp.protocol.make_client_capabilities()
+ capabilities = vim.tbl_deep_extend('force', capabilities, require('cmp_nvim_lsp').default_capabilities())
+
+ -- Enable the following language servers
+ -- Feel free to add/remove any LSPs that you want here. They will automatically be installed.
+ --
+ -- Add any additional override configuration in the following tables. Available keys are:
+ -- - cmd (table): Override the default command used to start the server
+ -- - filetypes (table): Override the default list of associated filetypes for the server
+ -- - capabilities (table): Override fields in capabilities. Can be used to disable certain LSP features.
+ -- - settings (table): Override the default settings passed when initializing the server.
+ -- For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
+ local servers = {
+ -- clangd = {},
+ -- gopls = {},
+ -- pyright = {},
+ -- rust_analyzer = {},
+ -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
+ --
+ -- Some languages (like typescript) have entire language plugins that can be useful:
+ -- https://github.com/pmizio/typescript-tools.nvim
+ --
+ -- But for many setups, the LSP (`tsserver`) will work just fine
+ -- tsserver = {},
+ --
+
+ lua_ls = {
+ -- cmd = {...},
+ -- filetypes = { ...},
+ -- capabilities = {},
+ settings = {
+ Lua = {
+ completion = {
+ callSnippet = 'Replace',
+ },
+ -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings
+ -- diagnostics = { disable = { 'missing-fields' } },
+ },
+ },
+ },
+ }
+
+ -- Ensure the servers and tools above are installed
+ -- To check the current status of installed tools and/or manually install
+ -- other tools, you can run
+ -- :Mason
+ --
+ -- You can press `g?` for help in this menu.
+ require('mason').setup()
+
+ -- You can add other tools here that you want Mason to install
+ -- for you, so that they are available from within Neovim.
+ local ensure_installed = vim.tbl_keys(servers or {})
+ vim.list_extend(ensure_installed, {
+ 'stylua', -- Used to format Lua code
+ })
+ require('mason-tool-installer').setup { ensure_installed = ensure_installed }
+
+ require('mason-lspconfig').setup {
+ handlers = {
+ function(server_name)
+ local server = servers[server_name] or {}
+ -- This handles overriding only values explicitly passed
+ -- by the server configuration above. Useful when disabling
+ -- certain features of an LSP (for example, turning off formatting for tsserver)
+ server.capabilities = vim.tbl_deep_extend('force', {}, capabilities, server.capabilities or {})
+ require('lspconfig')[server_name].setup(server)
+ end,
+ },
+ }
+ end,
+ },
+}
+-- vim: ts=2 sts=2 sw=2 et
diff --git a/lua/kickstart/plugins/mini.lua b/lua/kickstart/plugins/mini.lua
new file mode 100644
index 0000000..3e924a8
--- /dev/null
+++ b/lua/kickstart/plugins/mini.lua
@@ -0,0 +1,40 @@
+return {
+ { -- Collection of various small independent plugins/modules
+ 'echasnovski/mini.nvim',
+ config = function()
+ -- Better Around/Inside textobjects
+ --
+ -- Examples:
+ -- - va) - [V]isually select [A]round [)]paren
+ -- - yinq - [Y]ank [I]nside [N]ext [']quote
+ -- - ci' - [C]hange [I]nside [']quote
+ require('mini.ai').setup { n_lines = 500 }
+
+ -- Add/delete/replace surroundings (brackets, quotes, etc.)
+ --
+ -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren
+ -- - sd' - [S]urround [D]elete [']quotes
+ -- - sr)' - [S]urround [R]eplace [)] [']
+ require('mini.surround').setup()
+
+ -- Simple and easy statusline.
+ -- You could remove this setup call if you don't like it,
+ -- and try some other statusline plugin
+ local statusline = require 'mini.statusline'
+ -- set use_icons to true if you have a Nerd Font
+ statusline.setup { use_icons = vim.g.have_nerd_font }
+
+ -- You can configure sections in the statusline by overriding their
+ -- default behavior. For example, here we set the section for
+ -- cursor location to LINE:COLUMN
+ ---@diagnostic disable-next-line: duplicate-set-field
+ statusline.section_location = function()
+ return '%2l:%-2v'
+ end
+
+ -- ... and there is more!
+ -- Check out: https://github.com/echasnovski/mini.nvim
+ end,
+ },
+}
+-- vim: ts=2 sts=2 sw=2 et
diff --git a/lua/kickstart/plugins/telescope.lua b/lua/kickstart/plugins/telescope.lua
new file mode 100644
index 0000000..159971f
--- /dev/null
+++ b/lua/kickstart/plugins/telescope.lua
@@ -0,0 +1,114 @@
+-- NOTE: Plugins can specify dependencies.
+--
+-- The dependencies are proper plugin specifications as well - anything
+-- you do for a plugin at the top level, you can do for a dependency.
+--
+-- Use the `dependencies` key to specify the dependencies of a particular plugin
+
+return {
+ { -- Fuzzy Finder (files, lsp, etc)
+ 'nvim-telescope/telescope.nvim',
+ event = 'VimEnter',
+ branch = '0.1.x',
+ dependencies = {
+ 'nvim-lua/plenary.nvim',
+ { -- If encountering errors, see telescope-fzf-native README for installation instructions
+ 'nvim-telescope/telescope-fzf-native.nvim',
+
+ -- `build` is used to run some command when the plugin is installed/updated.
+ -- This is only run then, not every time Neovim starts up.
+ build = 'make',
+
+ -- `cond` is a condition used to determine whether this plugin should be
+ -- installed and loaded.
+ cond = function()
+ return vim.fn.executable 'make' == 1
+ end,
+ },
+ { 'nvim-telescope/telescope-ui-select.nvim' },
+
+ -- Useful for getting pretty icons, but requires a Nerd Font.
+ { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font },
+ },
+ config = function()
+ -- Telescope is a fuzzy finder that comes with a lot of different things that
+ -- it can fuzzy find! It's more than just a "file finder", it can search
+ -- many different aspects of Neovim, your workspace, LSP, and more!
+ --
+ -- The easiest way to use Telescope, is to start by doing something like:
+ -- :Telescope help_tags
+ --
+ -- After running this command, a window will open up and you're able to
+ -- type in the prompt window. You'll see a list of `help_tags` options and
+ -- a corresponding preview of the help.
+ --
+ -- Two important keymaps to use while in Telescope are:
+ -- - Insert mode: <c-/>
+ -- - Normal mode: ?
+ --
+ -- This opens a window that shows you all of the keymaps for the current
+ -- Telescope picker. This is really useful to discover what Telescope can
+ -- do as well as how to actually do it!
+
+ -- [[ Configure Telescope ]]
+ -- See `:help telescope` and `:help telescope.setup()`
+ require('telescope').setup {
+ -- You can put your default mappings / updates / etc. in here
+ -- All the info you're looking for is in `:help telescope.setup()`
+ --
+ -- defaults = {
+ -- mappings = {
+ -- i = { ['<c-enter>'] = 'to_fuzzy_refine' },
+ -- },
+ -- },
+ -- pickers = {}
+ extensions = {
+ ['ui-select'] = {
+ require('telescope.themes').get_dropdown(),
+ },
+ },
+ }
+
+ -- Enable Telescope extensions if they are installed
+ pcall(require('telescope').load_extension, 'fzf')
+ pcall(require('telescope').load_extension, 'ui-select')
+
+ -- See `:help telescope.builtin`
+ local builtin = require 'telescope.builtin'
+ vim.keymap.set('n', '<leader>sh', builtin.help_tags, { desc = '[S]earch [H]elp' })
+ vim.keymap.set('n', '<leader>sk', builtin.keymaps, { desc = '[S]earch [K]eymaps' })
+ vim.keymap.set('n', '<leader>sf', builtin.find_files, { desc = '[S]earch [F]iles' })
+ vim.keymap.set('n', '<leader>ss', builtin.builtin, { desc = '[S]earch [S]elect Telescope' })
+ vim.keymap.set('n', '<leader>sw', builtin.grep_string, { desc = '[S]earch current [W]ord' })
+ vim.keymap.set('n', '<leader>sg', builtin.live_grep, { desc = '[S]earch by [G]rep' })
+ vim.keymap.set('n', '<leader>sd', builtin.diagnostics, { desc = '[S]earch [D]iagnostics' })
+ vim.keymap.set('n', '<leader>sr', builtin.resume, { desc = '[S]earch [R]esume' })
+ vim.keymap.set('n', '<leader>s.', builtin.oldfiles, { desc = '[S]earch Recent Files ("." for repeat)' })
+ vim.keymap.set('n', '<leader><leader>', builtin.buffers, { desc = '[ ] Find existing buffers' })
+
+ -- Slightly advanced example of overriding default behavior and theme
+ vim.keymap.set('n', '<leader>/', function()
+ -- You can pass additional configuration to Telescope to change the theme, layout, etc.
+ builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown {
+ winblend = 10,
+ previewer = false,
+ })
+ end, { desc = '[/] Fuzzily search in current buffer' })
+
+ -- It's also possible to pass additional configuration options.
+ -- See `:help telescope.builtin.live_grep()` for information about particular keys
+ vim.keymap.set('n', '<leader>s/', function()
+ builtin.live_grep {
+ grep_open_files = true,
+ prompt_title = 'Live Grep in Open Files',
+ }
+ end, { desc = '[S]earch [/] in Open Files' })
+
+ -- Shortcut for searching your Neovim configuration files
+ vim.keymap.set('n', '<leader>sn', function()
+ builtin.find_files { cwd = vim.fn.stdpath 'config' }
+ end, { desc = '[S]earch [N]eovim files' })
+ end,
+ },
+}
+-- vim: ts=2 sts=2 sw=2 et
diff --git a/lua/kickstart/plugins/todo-comments.lua b/lua/kickstart/plugins/todo-comments.lua
new file mode 100644
index 0000000..407e821
--- /dev/null
+++ b/lua/kickstart/plugins/todo-comments.lua
@@ -0,0 +1,5 @@
+-- Highlight todo, notes, etc in comments
+return {
+ { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } },
+}
+-- vim: ts=2 sts=2 sw=2 et
diff --git a/lua/kickstart/plugins/tokyonight.lua b/lua/kickstart/plugins/tokyonight.lua
new file mode 100644
index 0000000..3e5e74d
--- /dev/null
+++ b/lua/kickstart/plugins/tokyonight.lua
@@ -0,0 +1,20 @@
+return {
+ { -- You can easily change to a different colorscheme.
+ -- Change the name of the colorscheme plugin below, and then
+ -- change the command in the config to whatever the name of that colorscheme is.
+ --
+ -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`.
+ 'folke/tokyonight.nvim',
+ priority = 1000, -- Make sure to load this before all the other start plugins.
+ init = function()
+ -- Load the colorscheme here.
+ -- Like many other themes, this one has different styles, and you could load
+ -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'.
+ vim.cmd.colorscheme 'tokyonight-night'
+
+ -- You can configure highlights by doing something like:
+ vim.cmd.hi 'Comment gui=none'
+ end,
+ },
+}
+-- vim: ts=2 sts=2 sw=2 et
diff --git a/lua/kickstart/plugins/treesitter.lua b/lua/kickstart/plugins/treesitter.lua
new file mode 100644
index 0000000..3e67507
--- /dev/null
+++ b/lua/kickstart/plugins/treesitter.lua
@@ -0,0 +1,35 @@
+return {
+ { -- Highlight, edit, and navigate code
+ 'nvim-treesitter/nvim-treesitter',
+ build = ':TSUpdate',
+ opts = {
+ ensure_installed = { 'bash', 'c', 'diff', 'html', 'lua', 'luadoc', 'markdown', 'vim', 'vimdoc' },
+ -- Autoinstall languages that are not installed
+ auto_install = true,
+ highlight = {
+ enable = true,
+ -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules.
+ -- If you are experiencing weird indenting issues, add the language to
+ -- the list of additional_vim_regex_highlighting and disabled languages for indent.
+ additional_vim_regex_highlighting = { 'ruby' },
+ },
+ indent = { enable = true, disable = { 'ruby' } },
+ },
+ config = function(_, opts)
+ -- [[ Configure Treesitter ]] See `:help nvim-treesitter`
+
+ -- Prefer git instead of curl in order to improve connectivity in some environments
+ require('nvim-treesitter.install').prefer_git = true
+ ---@diagnostic disable-next-line: missing-fields
+ require('nvim-treesitter.configs').setup(opts)
+
+ -- There are additional nvim-treesitter modules that you can use to interact
+ -- with nvim-treesitter. You should go explore a few and see what interests you:
+ --
+ -- - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod`
+ -- - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
+ -- - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
+ end,
+ },
+}
+-- vim: ts=2 sts=2 sw=2 et
diff --git a/lua/kickstart/plugins/which-key.lua b/lua/kickstart/plugins/which-key.lua
new file mode 100644
index 0000000..54d7409
--- /dev/null
+++ b/lua/kickstart/plugins/which-key.lua
@@ -0,0 +1,40 @@
+-- NOTE: Plugins can also be configured to run Lua code when they are loaded.
+--
+-- This is often very useful to both group configuration, as well as handle
+-- lazy loading plugins that don't need to be loaded immediately at startup.
+--
+-- For example, in the following configuration, we use:
+-- event = 'VimEnter'
+--
+-- which loads which-key before all the UI elements are loaded. Events can be
+-- normal autocommands events (`:help autocmd-events`).
+--
+-- Then, because we use the `config` key, the configuration only runs
+-- after the plugin has been loaded:
+-- config = function() ... end
+
+return {
+ { -- Useful plugin to show you pending keybinds.
+ 'folke/which-key.nvim',
+ event = 'VimEnter', -- Sets the loading event to 'VimEnter'
+ config = function() -- This is the function that runs, AFTER loading
+ require('which-key').setup()
+
+ -- Document existing key chains
+ require('which-key').register {
+ ['<leader>c'] = { name = '[C]ode', _ = 'which_key_ignore' },
+ ['<leader>d'] = { name = '[D]ocument', _ = 'which_key_ignore' },
+ ['<leader>r'] = { name = '[R]ename', _ = 'which_key_ignore' },
+ ['<leader>s'] = { name = '[S]earch', _ = 'which_key_ignore' },
+ ['<leader>w'] = { name = '[W]orkspace', _ = 'which_key_ignore' },
+ ['<leader>t'] = { name = '[T]oggle', _ = 'which_key_ignore' },
+ ['<leader>h'] = { name = 'Git [H]unk', _ = 'which_key_ignore' },
+ }
+ -- visual mode
+ require('which-key').register({
+ ['<leader>h'] = { 'Git [H]unk' },
+ }, { mode = 'v' })
+ end,
+ },
+}
+-- vim: ts=2 sts=2 sw=2 et
diff --git a/lua/lazy-bootstrap.lua b/lua/lazy-bootstrap.lua
new file mode 100644
index 0000000..5ea6ffc
--- /dev/null
+++ b/lua/lazy-bootstrap.lua
@@ -0,0 +1,10 @@
+-- [[ Install `lazy.nvim` plugin manager ]]
+-- See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
+local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
+if not vim.loop.fs_stat(lazypath) then
+ local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
+ vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
+end ---@diagnostic disable-next-line: undefined-field
+vim.opt.rtp:prepend(lazypath)
+
+-- vim: ts=2 sts=2 sw=2 et
diff --git a/lua/lazy-plugins.lua b/lua/lazy-plugins.lua
new file mode 100644
index 0000000..e93e193
--- /dev/null
+++ b/lua/lazy-plugins.lua
@@ -0,0 +1,94 @@
+-- [[ Configure and install plugins ]]
+--
+-- To check the current status of your plugins, run
+-- :Lazy
+--
+-- You can press `?` in this menu for help. Use `:q` to close the window
+--
+-- To update plugins you can run
+-- :Lazy update
+--
+-- NOTE: Here is where you install your plugins.
+require('lazy').setup({
+ -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
+ 'tpope/vim-sleuth', -- Detect tabstop and shiftwidth automatically
+
+ -- NOTE: Plugins can also be added by using a table,
+ -- with the first argument being the link and the following
+ -- keys can be used to configure plugin behavior/loading/etc.
+ --
+ -- Use `opts = {}` to force a plugin to be loaded.
+ --
+ -- This is equivalent to:
+ -- require('Comment').setup({})
+
+ -- "gc" to comment visual regions/lines
+ { 'numToStr/Comment.nvim', opts = {} },
+
+ -- modular approach: using `require 'path/name'` will
+ -- include a plugin definition from file lua/path/name.lua
+
+ require 'kickstart/plugins/gitsigns',
+
+ require 'kickstart/plugins/which-key',
+
+ require 'kickstart/plugins/telescope',
+
+ require 'kickstart/plugins/lspconfig',
+
+ require 'kickstart/plugins/conform',
+
+ require 'kickstart/plugins/cmp',
+
+ require 'kickstart/plugins/tokyonight',
+
+ require 'kickstart/plugins/todo-comments',
+
+ require 'kickstart/plugins/mini',
+
+ require 'kickstart/plugins/treesitter',
+
+ -- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the
+ -- init.lua. If you want these files, they are in the repository, so you can just download them and
+ -- place them in the correct locations.
+
+ -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for Kickstart
+ --
+ -- Here are some example plugins that I've included in the Kickstart repository.
+ -- Uncomment any of the lines below to enable them (you will need to restart nvim).
+ --
+ -- require 'kickstart.plugins.debug',
+ -- require 'kickstart.plugins.indent_line',
+ -- require 'kickstart.plugins.lint',
+ -- require 'kickstart.plugins.autopairs',
+ -- require 'kickstart.plugins.neo-tree',
+
+ -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
+ -- This is the easiest way to modularize your config.
+ --
+ -- Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
+ -- For additional information, see `:help lazy.nvim-lazy.nvim-structuring-your-plugins`
+ -- { import = 'custom.plugins' },
+}, {
+ ui = {
+ -- If you are using a Nerd Font: set icons to an empty table which will use the
+ -- default lazy.nvim defined Nerd Font icons, otherwise define a unicode icons table
+ icons = vim.g.have_nerd_font and {} or {
+ cmd = '⌘',
+ config = 'πŸ› ',
+ event = 'πŸ“…',
+ ft = 'πŸ“‚',
+ init = 'βš™',
+ keys = 'πŸ—',
+ plugin = 'πŸ”Œ',
+ runtime = 'πŸ’»',
+ require = 'πŸŒ™',
+ source = 'πŸ“„',
+ start = 'πŸš€',
+ task = 'πŸ“Œ',
+ lazy = 'πŸ’€ ',
+ },
+ },
+})
+
+-- vim: ts=2 sts=2 sw=2 et
diff --git a/lua/options.lua b/lua/options.lua
new file mode 100644
index 0000000..c97d75f
--- /dev/null
+++ b/lua/options.lua
@@ -0,0 +1,62 @@
+-- [[ Setting options ]]
+-- See `:help vim.opt`
+-- NOTE: You can change these options as you wish!
+-- For more options, you can see `:help option-list`
+
+-- Make line numbers default
+vim.opt.number = true
+-- You can also add relative line numbers, to help with jumping.
+-- Experiment for yourself to see if you like it!
+-- vim.opt.relativenumber = true
+
+-- Enable mouse mode, can be useful for resizing splits for example!
+vim.opt.mouse = 'a'
+
+-- Don't show the mode, since it's already in the status line
+vim.opt.showmode = false
+
+-- Sync clipboard between OS and Neovim.
+-- Remove this option if you want your OS clipboard to remain independent.
+-- See `:help 'clipboard'`
+vim.opt.clipboard = 'unnamedplus'
+
+-- Enable break indent
+vim.opt.breakindent = true
+
+-- Save undo history
+vim.opt.undofile = true
+
+-- Case-insensitive searching UNLESS \C or one or more capital letters in the search term
+vim.opt.ignorecase = true
+vim.opt.smartcase = true
+
+-- Keep signcolumn on by default
+vim.opt.signcolumn = 'yes'
+
+-- Decrease update time
+vim.opt.updatetime = 250
+
+-- Decrease mapped sequence wait time
+-- Displays which-key popup sooner
+vim.opt.timeoutlen = 300
+
+-- Configure how new splits should be opened
+vim.opt.splitright = true
+vim.opt.splitbelow = true
+
+-- Sets how neovim will display certain whitespace characters in the editor.
+-- See `:help 'list'`
+-- and `:help 'listchars'`
+vim.opt.list = true
+vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }
+
+-- Preview substitutions live, as you type!
+vim.opt.inccommand = 'split'
+
+-- Show which line your cursor is on
+vim.opt.cursorline = true
+
+-- Minimal number of screen lines to keep above and below the cursor.
+vim.opt.scrolloff = 10
+
+-- vim: ts=2 sts=2 sw=2 et